Will the furniture fit through the route?

Measure the item including packaging, then the clear opening at each route bottleneck.

How this check works

Each door, corridor, stair width/headroom and destination opening is checked. Turns use a conservative footprint diagonal envelope.

The calculator starts with a labeled illustrative setup, not a named product. Replace the sample dimensions with measured values before relying on the result.

Example setup. Values are illustrative examples, not defaults for a product, manufacturer or local building standard. Replace them with measured dimensions.

Compare an upright item with door, hall, turn, stair and destination bottlenecks using dimensions you measure.

Length entries accept mm, cm, m, inches or feet. Weight fields are in kg. Check the exact product manual for model-dependent requirements.

Fits

Fits. Tightest constraint: front door width (upright, no tilt). Physical space remaining: 20.0 cm 0 ft 8 in. After your selected target: 20.0 cm 0 ft 8 in.

Fits20.0 cm 0 ft 8 in after targetView details ↑

Compare an upright item with door, hall, turn, stair and destination bottlenecks using dimensions you measure.

        DimensionRequiredTargetAvailablePhysical marginTarget margin
        front door width (upright, no tilt)70.0 cm 2 ft 4 in70.0 cm 2 ft 4 in90.0 cm 2 ft 11 in+20.0 cm 0 ft 8 in+20.0 cm 0 ft 8 in
        front door height (upright, no tilt)180.0 cm 5 ft 11 in180.0 cm 5 ft 11 in200.0 cm 6 ft 7 in+20.0 cm 0 ft 8 in+20.0 cm 0 ft 8 in
        hall clear width (upright)70.0 cm 2 ft 4 in70.0 cm 2 ft 4 in100.0 cm 3 ft 3 in+30.0 cm 1 ft 0 in+30.0 cm 1 ft 0 in
        turn landing width (conservative diagonal envelope)114.0 cm 3 ft 9 in114.0 cm 3 ft 9 in180.0 cm 5 ft 11 in+66.0 cm 2 ft 2 in+66.0 cm 2 ft 2 in
        turn landing depth (conservative diagonal envelope)114.0 cm 3 ft 9 in114.0 cm 3 ft 9 in180.0 cm 5 ft 11 in+66.0 cm 2 ft 2 in+66.0 cm 2 ft 2 in
        stair clear width (upright)70.0 cm 2 ft 4 in70.0 cm 2 ft 4 in90.0 cm 2 ft 11 in+20.0 cm 0 ft 8 in+20.0 cm 0 ft 8 in
        stair headroom (upright, no tilt)180.0 cm 5 ft 11 in180.0 cm 5 ft 11 in210.0 cm 6 ft 11 in+30.0 cm 1 ft 0 in+30.0 cm 1 ft 0 in
        destination door width (upright)70.0 cm 2 ft 4 in70.0 cm 2 ft 4 in90.0 cm 2 ft 11 in+20.0 cm 0 ft 8 in+20.0 cm 0 ft 8 in
        destination door height (upright, no tilt)180.0 cm 5 ft 11 in180.0 cm 5 ft 11 in200.0 cm 6 ft 7 in+20.0 cm 0 ft 8 in+20.0 cm 0 ft 8 in

        Assumptions

        • The item is carried upright and may be yawed so its narrower base dimension faces across an opening.
        • A 90-degree turn uses a conservative circumscribed diagonal envelope, which can reject paths that skilled movers might negotiate; it is not a motion simulation.
        • Stairs are checked only for clear width and headroom. Tilt, lifting path, slope, handrails, landings between flights, packaging flex and door hardware are not simulated.

        Scope and limitations

        • No translation/rotation motion solver is used; the turn bound can reject paths movers can negotiate.
        • Tilt, lift, handles, thresholds and packaging flex are excluded.

        Sources and entered data

        • Fitwise internal reference-size and clearance convention — Fitwise.stream

        Calculation methodology · Measurement conventions · About and data sources