What bed fits in 10x10 room
Compare market-specific mattress footprints against the 10 × 10 ft reference bedroom (US). Results distinguish mattress-only physical fit from recommended side/foot clearances.
US Full mattress (often called Double) — portrait orientation
- Market
- US
- Mattress footprint
- 1371.6 × 1905 mm
- Room width required (physical)
- 137.2 cm4 ft 6 in
- Room width recommended
- 259.1 cm8 ft 6 in
- Room width available
- 304.8 cm10 ft 0 in
- Room length required (physical)
- 190.5 cm6 ft 3 in
- Room length recommended
- 251.5 cm8 ft 3 in
- Room length available
- 304.8 cm10 ft 0 in
- Fit result
- ✓ Fits
Assumptions for us full mattress (often called double) — portrait orientation
- Room dimensions are nominal US feet converted to millimetres from the 10 × 10 ft reference bedroom (US).
- Mattress footprint only; frame overhang and nightstands are not included.
- Apply the recommendation to each accessible side; actual access needs vary. Editorial comfort guidance, not a regulation.
- FitWise modeling assumption: 24 inches at the foot. Sleep Foundation discusses space around each side; applying that figure at the foot is an extrapolation, not direct source guidance or a code minimum. The geometry engine treats the headboard as against a wall.
US Queen mattress — portrait orientation
- Market
- US
- Mattress footprint
- 1524 × 2032 mm
- Room width required (physical)
- 152.4 cm5 ft 0 in
- Room width recommended
- 274.3 cm9 ft 0 in
- Room width available
- 304.8 cm10 ft 0 in
- Room length required (physical)
- 203.2 cm6 ft 8 in
- Room length recommended
- 264.2 cm8 ft 8 in
- Room length available
- 304.8 cm10 ft 0 in
- Fit result
- ✓ Fits
Assumptions for us queen mattress — portrait orientation
- Room dimensions are nominal US feet converted to millimetres from the 10 × 10 ft reference bedroom (US).
- Mattress footprint only; frame overhang and nightstands are not included.
- Apply the recommendation to each accessible side; actual access needs vary. Editorial comfort guidance, not a regulation.
- FitWise modeling assumption: 24 inches at the foot. Sleep Foundation discusses space around each side; applying that figure at the foot is an extrapolation, not direct source guidance or a code minimum. The geometry engine treats the headboard as against a wall.
US King mattress — portrait orientation
- Market
- US
- Mattress footprint
- 1930.3999999999999 × 2032 mm
- Room width required (physical)
- 193.0 cm6 ft 4 in
- Room width recommended
- 315.0 cm10 ft 4 in
- Room width available
- 304.8 cm10 ft 0 in
- Room length required (physical)
- 203.2 cm6 ft 8 in
- Room length recommended
- 264.2 cm8 ft 8 in
- Room length available
- 304.8 cm10 ft 0 in
- Fit result
- △ Tight fit
Assumptions for us king mattress — portrait orientation
- Room dimensions are nominal US feet converted to millimetres from the 10 × 10 ft reference bedroom (US).
- Mattress footprint only; frame overhang and nightstands are not included.
- Apply the recommendation to each accessible side; actual access needs vary. Editorial comfort guidance, not a regulation.
- FitWise modeling assumption: 24 inches at the foot. Sleep Foundation discusses space around each side; applying that figure at the foot is an extrapolation, not direct source guidance or a code minimum. The geometry engine treats the headboard as against a wall.
Sources and evidence
- Fitwise internal reference-size and clearance convention Fitwise.stream; accessed 2026-10-06
Internally documented round-number reference sizes and comfort-clearance recommendations used when no single external standard applies; see specs/DATA_MODEL.md §2.
- Mattress Sizes 101: Finding Your Perfect Fit — Bedroom Dimensions Sleep Foundation; accessed 2026-10-06
Editorial recommendation to leave about 24 inches of space around each side of a bed to avoid a cramped feeling. This is guidance, not a building code or accessibility requirement.
- Mattress Sizes 101: Finding Your Perfect Fit Sleep Foundation; accessed 2026-10-06
Publishes US nominal mattress dimensions in inches. US King 76×80, Queen 60×80, Full 54×75. Values converted to millimetres; "Full" is used as the US-market term rather than treating Double as a universal name.