Will the pool table and cue fit?

Use the table outside dimensions and actual cue length that will be used in the room.

How this check works

Cue length is added at each table edge to show a rectangular play envelope; extra space is a separate user target.

The calculator starts with a labeled illustrative setup, not a named product. Replace the sample dimensions with measured values before relying on the result.

Example setup. Values are illustrative examples, not defaults for a product, manufacturer or local building standard. Replace them with measured dimensions.

Compare the measured table and cue length with room dimensions; cue clearance is calculated from the actual cue you enter.

Length entries accept mm, cm, m, inches or feet. Weight fields are in kg. Check the exact product manual for model-dependent requirements.

Fits

Fits. Tightest constraint: table plus cue-length clearance across room. Physical space remaining: 10.0 cm 0 ft 4 in. After your selected target: 10.0 cm 0 ft 4 in.

Fits10.0 cm 0 ft 4 in after targetView details ↑

Compare the measured table and cue length with room dimensions; cue clearance is calculated from the actual cue you enter.

        DimensionRequiredTargetAvailablePhysical marginTarget margin
        table plus cue-length clearance across room430.0 cm 14 ft 1 in430.0 cm 14 ft 1 in440.0 cm 14 ft 5 in+10.0 cm 0 ft 4 in+10.0 cm 0 ft 4 in
        table plus cue-length clearance along room540.0 cm 17 ft 9 in540.0 cm 17 ft 9 in550.0 cm 18 ft 1 in+10.0 cm 0 ft 4 in+10.0 cm 0 ft 4 in

        Assumptions

        • Cue length is the measured cue used for play. The envelope reserves cue length at each table edge.
        • The extra margin is user-selected. The model does not simulate angled shots, player stance, cue elevation, table pockets or other furniture.

        Scope and limitations

        • Angled shots, player stance, cue elevation, pockets and furniture are not simulated.
        • This is not a cue-trajectory or safety assessment.

        Sources and entered data

        • Fitwise internal reference-size and clearance convention — Fitwise.stream

        Calculation methodology · Measurement conventions · About and data sources