Will the vehicle and door access fit the garage?

Enter the actual vehicle outside dimensions in the mirror/accessory configuration you plan to park.

How this check works

The hard parking footprint is separate from garage opening, door projection, front/rear and overhead targets.

The calculator starts with a labeled illustrative setup, not a named product. Replace the sample dimensions with measured values before relying on the result.

Example setup. Values are illustrative examples, not defaults for a product, manufacturer or local building standard. Replace them with measured dimensions.

Compare your measured vehicle, garage opening and parking space, then add door-access and overhead zones you choose.

Vehicle outside width in parking configuration (include mirrors/accessories as measured)

Vehicle outside length

Vehicle outside height (include roof equipment)

Garage clear inside width

Garage clear inside depth

Garage clear ceiling height

Garage door clear opening width

Garage door clear opening height

Vehicle door projection beyond body on each side (measured)

Extra access space beyond open door (user selected)

Extra space in front of parked vehicle (user selected)

Extra space behind parked vehicle (user selected)

Extra overhead space (user/manual selected)

Length entries accept mm, cm, m, inches or feet. Weight fields are in kg. Check the exact product manual for model-dependent requirements.

Fits

Fits. Tightest constraint: parked vehicle length and selected front/rear space. Physical space remaining: 120.0 cm 3 ft 11 in. After your selected target: 20.0 cm 0 ft 8 in.

Fits20.0 cm 0 ft 8 in after targetView details ↑

Compare your measured vehicle, garage opening and parking space, then add door-access and overhead zones you choose.

Dimensions and compatibility envelopes for the selected Fit Services calculation
Dimension	Required	Target	Available	Physical margin	Target margin
vehicle and open-door access width	190.0 cm 6 ft 3 in	330.0 cm 10 ft 10 in	360.0 cm 11 ft 10 in	+170.0 cm 5 ft 7 in	+30.0 cm 1 ft 0 in
parked vehicle length and selected front/rear space	480.0 cm 15 ft 9 in	580.0 cm 19 ft 0 in	600.0 cm 19 ft 8 in	+120.0 cm 3 ft 11 in	+20.0 cm 0 ft 8 in
vehicle height and selected overhead space	180.0 cm 5 ft 11 in	200.0 cm 6 ft 7 in	240.0 cm 7 ft 10 in	+60.0 cm 2 ft 0 in	+40.0 cm 1 ft 4 in
vehicle width at garage door opening	190.0 cm 6 ft 3 in	190.0 cm 6 ft 3 in	240.0 cm 7 ft 10 in	+50.0 cm 1 ft 8 in	+50.0 cm 1 ft 8 in
vehicle height at garage door opening	180.0 cm 5 ft 11 in	180.0 cm 5 ft 11 in	220.0 cm 7 ft 3 in	+40.0 cm 1 ft 4 in	+40.0 cm 1 ft 4 in

Assumptions

Vehicle dimensions are user-entered for the actual mirror/accessory configuration. Fitwise has no vehicle specification database in this mode.
Door projection and extra access/parking/overhead space are user-selected measurements, not universal parking, safety or accessibility standards.
The check does not model driveway approach angle, steering path, ramps, lift equipment, garage-door tracks, mirrors folding, or opening/closing maneuvers.

Scope and limitations

There is no vehicle dimension database.
Driveway approach, steering, turning, ramps, garage tracks and door operation paths are not simulated.

Sources and entered data

Fitwise internal reference-size and clearance convention — Fitwise.stream

Calculation methodology · Measurement conventions · About and data sources