What fits in the storage space?

Measure usable inside dimensions, objects, gap and aisle. Nominal storage-unit size may differ from the usable interior.

How this check works

A rectangular grid tries both floor orientations and checks height; the requested count is compared with a single-layer capacity estimate.

The calculator starts with a labeled illustrative setup, not a named product. Replace the sample dimensions with measured values before relying on the result.

Example setup. Values are illustrative examples, not defaults for a product, manufacturer or local building standard. Replace them with measured dimensions.

Estimate how many equal rectangular objects fit in one layer; enter a measured usable interior and aisle target.

Length entries accept mm, cm, m, inches or feet. Weight fields are in kg. Check the exact product manual for model-dependent requirements.

Fits

Fits. Tightest constraint: measured aisle against selected aisle target. Physical space remaining: 0.0 cm 0 ft 0 in. After your selected target: 0.0 cm 0 ft 0 in.

Fits0.0 cm 0 ft 0 in after targetView details ↑

Estimate how many equal rectangular objects fit in one layer; enter a measured usable interior and aisle target. Estimated single-layer capacity: 12; requested 8.

  • Compatible: Requested count fits in a single layer. Estimated grid capacity 12; requested 8.
      DimensionRequiredTargetAvailablePhysical marginTarget margin
      space width60.0 cm 2 ft 0 in60.0 cm 2 ft 0 in240.0 cm 7 ft 10 in+180.0 cm 5 ft 11 in+180.0 cm 5 ft 11 in
      space depth40.0 cm 1 ft 4 in40.0 cm 1 ft 4 in180.0 cm 5 ft 11 in+140.0 cm 4 ft 7 in+140.0 cm 4 ft 7 in
      space height50.0 cm 1 ft 8 in50.0 cm 1 ft 8 in220.0 cm 7 ft 3 in+170.0 cm 5 ft 7 in+170.0 cm 5 ft 7 in
      measured aisle against selected aisle target90.0 cm 2 ft 11 in90.0 cm 2 ft 11 in90.0 cm 2 ft 11 in0.0 cm 0 ft 0 in0.0 cm 0 ft 0 in

      Assumptions

      • Capacity is a rectangular single-layer grid estimate across both floor orientations.
      • Stacking, load rating, mixed objects, supports and aisle routing are not modeled.
      • The aisle target is user-selected, not an accessibility or building-code claim.

      Scope and limitations

      • Mixed-size objects, stacking, load ratings, shelving supports and aisle route optimization are excluded.
      • The aisle target is user-entered, not an accessibility standard.

      Sources and entered data

      • Fitwise internal reference-size and clearance convention — Fitwise.stream

      Calculation methodology · Measurement conventions · About and data sources