Will the TV fit the stand or wall space?

Enter actual outside width and height from the TV documentation. Screen diagonal alone is not used as a substitute for device dimensions.

How this check works

Stand mode checks TV/stand/soundbar footprints against a console; wall mode checks screen envelope, exact VESA patterns and rated load.

The calculator starts with a labeled illustrative setup, not a named product. Replace the sample dimensions with measured values before relying on the result.

Example setup. Values are illustrative examples, not defaults for a product, manufacturer or local building standard. Replace them with measured dimensions.

Check actual outside dimensions against a console or mounting area; wall mode also checks the exact mount pattern and weight rating.

Installation type

TV outside width

TV outside height

Console usable width

Console usable depth

Stand outside width

Stand outside depth

Soundbar outside width (0 if not used)

Soundbar outside depth (0 if not used)

Length entries accept mm, cm, m, inches or feet. Weight fields are in kg. Check the exact product manual for model-dependent requirements.

Fits

Fits. Tightest constraint: stand footprint depth on console. Physical space remaining: 10.0 cm 0 ft 4 in. After your selected target: 10.0 cm 0 ft 4 in.

Fits10.0 cm 0 ft 4 in after targetView details ↑

Check actual outside dimensions against a console or mounting area; wall mode also checks the exact mount pattern and weight rating.

Dimensions and compatibility envelopes for the selected Fit Services calculation
Dimension	Required	Target	Available	Physical margin	Target margin
TV width on console	123.0 cm 4 ft 0 in	123.0 cm 4 ft 0 in	140.0 cm 4 ft 7 in	+17.0 cm 0 ft 7 in	+17.0 cm 0 ft 7 in
stand footprint width on console	65.0 cm 2 ft 2 in	65.0 cm 2 ft 2 in	140.0 cm 4 ft 7 in	+75.0 cm 2 ft 6 in	+75.0 cm 2 ft 6 in
stand footprint depth on console	30.0 cm 1 ft 0 in	30.0 cm 1 ft 0 in	40.0 cm 1 ft 4 in	+10.0 cm 0 ft 4 in	+10.0 cm 0 ft 4 in

Assumptions

TV and stand dimensions are user-entered outside measurements, not inferred from advertised diagonal size.
TV, stand and soundbar each fit the console surface independently; their combined placement and overlap are not optimized.
This mode does not check viewing distance, wall mount patterns, cables or ventilation.

Scope and limitations

Stand/soundbar co-placement is checked separately, not packed or overlap-simulated.
Wall construction, fasteners, stud placement and viewing distance are not assessed.

Sources and entered data

Fitwise internal reference-size and clearance convention — Fitwise.stream

Calculation methodology · Measurement conventions · About and data sources