Will the greenhouse and usable aisle fit?
Enter exterior roof/body dimensions and clear internal width. Staging benches reduce the remaining central aisle width.
How this check works
The calculator checks the outside envelope against plot dimensions and compares inside width minus both staging depths with the aisle target you chose.
The calculator starts with a labeled illustrative setup, not a named product. Replace the sample dimensions with measured values before relying on the result.
Fits
Fits. Tightest constraint: wheelbarrow width through greenhouse door. Physical space remaining: 10.0 cm 0 ft 4 in. After your selected target: 10.0 cm 0 ft 4 in.
Fits10.0 cm 0 ft 4 in after targetView details ↑Clear aisle after the entered staging depth: 1300 mm.
| Dimension | Required | Target | Available | Physical margin | Target margin |
|---|---|---|---|---|---|
| greenhouse roof footprint and side maintenance space | 250.0 cm 8 ft 2 in | 350.0 cm 11 ft 6 in | 400.0 cm 13 ft 1 in | +150.0 cm 4 ft 11 in | +50.0 cm 1 ft 8 in |
| greenhouse roof footprint and end maintenance space | 310.0 cm 10 ft 2 in | 410.0 cm 13 ft 5 in | 500.0 cm 16 ft 5 in | +190.0 cm 6 ft 3 in | +90.0 cm 2 ft 11 in |
| central aisle after staging benches | 0.0 cm 0 ft 0 in | 60.0 cm 2 ft 0 in | 130.0 cm 4 ft 3 in | +130.0 cm 4 ft 3 in | +70.0 cm 2 ft 4 in |
| wheelbarrow width through greenhouse door | 60.0 cm 2 ft 0 in | 60.0 cm 2 ft 0 in | 70.0 cm 2 ft 4 in | +10.0 cm 0 ft 4 in | +10.0 cm 0 ft 4 in |
Assumptions
- Staging depth is entered on each side; the remaining clear width is compared with a user-selected central aisle target.
- Ventilation, sunlight, temperature, drainage, glazing, wind loading and foundations are outside this footprint calculation.
- Outside maintenance space is user-selected, not a horticultural or building-code minimum.
Scope and limitations
- Siting, light, ventilation, drainage, glazing, wind load and foundations are not assessed.
- No horticultural aisle minimum is inferred.
Sources and entered data
- Fitwise internal reference-size and clearance convention — Fitwise.stream
Calculation methodology · Measurement conventions · About and data sources