Will the hot tub and its service space fit?

Use the model manual for service-panel, cover-lift and electrical access space. Enter tub outside dimensions and a usable patio rectangle.

How this check works

Hard tub width/depth are checked separately from the side service, front-panel and overhead cover targets.

The calculator starts with a labeled illustrative setup, not a named product. Replace the sample dimensions with measured values before relying on the result.

Example setup. Values are illustrative examples, not defaults for a product, manufacturer or local building standard. Replace them with measured dimensions.

Compare the tub footprint with the patio and add the service/cover clearances required by your exact tub manual.

Length entries accept mm, cm, m, inches or feet. Weight fields are in kg. Check the exact product manual for model-dependent requirements.

Fits

Fits. Tightest constraint: tub footprint and side service space. Physical space remaining: 180.0 cm 5 ft 11 in. After your selected target: 80.0 cm 2 ft 7 in.

Fits80.0 cm 2 ft 7 in after targetView details ↑

Compare the tub footprint with the patio and add the service/cover clearances required by your exact tub manual.

        DimensionRequiredTargetAvailablePhysical marginTarget margin
        tub footprint and side service space220.0 cm 7 ft 3 in320.0 cm 10 ft 6 in400.0 cm 13 ft 1 in+180.0 cm 5 ft 11 in+80.0 cm 2 ft 7 in
        tub footprint and front service space220.0 cm 7 ft 3 in300.0 cm 9 ft 10 in400.0 cm 13 ft 1 in+180.0 cm 5 ft 11 in+100.0 cm 3 ft 3 in
        cover lift/overhead space95.0 cm 3 ft 1 in145.0 cm 4 ft 9 in300.0 cm 9 ft 10 in+205.0 cm 6 ft 9 in+155.0 cm 5 ft 1 in

        Assumptions

        • Service-panel and cover-removal clearances must come from the exact tub manual; zeros omit those optional targets.
        • No filled-water weight, base strength, drainage, electrical or access-path assessment is made.
        • The extra cover lift space is user/manual selected, not a generic overhead minimum.

        Scope and limitations

        • Water-filled weight, base strength, drainage, electrical work and delivery route are not evaluated.
        • No generic hot-tub service clearance is supplied.

        Sources and entered data

        • Fitwise internal reference-size and clearance convention — Fitwise.stream

        Calculation methodology · Measurement conventions · About and data sources