Will the dining layout fit under the gazebo?

Use the clear dimension between posts or obstacles. The advertised roof span is shown only for comparison and is not treated as usable floor area.

How this check works

The shared dining geometry checks table orientations, seat widths and chair envelopes against the clear span and user-selected circulation target.

The calculator starts with a labeled illustrative setup, not a named product. Replace the sample dimensions with measured values before relying on the result.

Example setup. Values are illustrative examples, not defaults for a product, manufacturer or local building standard. Replace them with measured dimensions.

Reuse the dining table/chair envelope against a measured patio or actual gazebo post-to-post clearance.

Advertised gazebo/structure width (reference only)

Advertised gazebo/structure depth (reference only)

Usable clear width between posts/obstacles

Usable clear depth between posts/obstacles

Table outside width

Table outside length

Measured chair width along table edge

Pulled-out chair envelope from table edge

Chairs per long side

Chairs at each end

Extra user-selected circulation beyond chairs

Table orientation

Length entries accept mm, cm, m, inches or feet. Weight fields are in kg. Check the exact product manual for model-dependent requirements.

Does not fit

Does not fit — the available space is short for room width for table and pulled-out chairs by 4.0 cm. See the table for each dimension's physical and target margins.

Does not fitPhysical shortView details ↑

Advertised footprint: 3000 mm × 3000 mm. Clear post-to-post space used by the calculation: 2860 mm × 2860 mm.

Dimensions and compatibility envelopes for the selected Fit Services calculation
Dimension	Required	Target	Available	Physical margin	Target margin
room width for table and pulled-out chairs	290.0 cm 9 ft 6 in	370.0 cm 12 ft 2 in	286.0 cm 9 ft 5 in	−4.0 cm 0 ft 2 in	−84.0 cm 2 ft 9 in
room length for table and pulled-out chairs	200.0 cm 6 ft 7 in	280.0 cm 9 ft 2 in	286.0 cm 9 ft 5 in	+86.0 cm 2 ft 10 in	+6.0 cm 0 ft 2 in
width available along each long table side	90.0 cm 2 ft 11 in	90.0 cm 2 ft 11 in	90.0 cm 2 ft 11 in	0.0 cm 0 ft 0 in	0.0 cm 0 ft 0 in
width available along each short table end	45.0 cm 1 ft 6 in	45.0 cm 1 ft 6 in	180.0 cm 5 ft 11 in	+135.0 cm 4 ft 5 in	+135.0 cm 4 ft 5 in

Assumptions

The dining model reuses the rectangular table/chair envelope. Chair/table values are measured examples; the movement target is user-selected.
Actual clear post-to-post width/depth are used as available space; the advertised roof footprint is shown for comparison only.
Roof legs, guy ropes, sidewalls, rain/runoff, anchoring and non-rectangular patios are not modeled.

Scope and limitations

Guy ropes, sidewalls, angled legs, anchoring and non-rectangular footprints are excluded.
Walking allowance is user-selected, not a universal gazebo standard.

Sources and entered data

Fitwise internal reference-size and clearance convention — Fitwise.stream

Calculation methodology · Measurement conventions · About and data sources