Will the monitor, arm and desk work together?

Measure the monitor without its stand, then transcribe weight, VESA and clamp/load limits from the exact monitor and arm manuals.

How this check works

The calculator checks monitor width and monitor-plus-arm-base depth against the desk, desk thickness against clamp limits, exact VESA pattern support and monitor weight against arm rating.

The calculator starts with a labeled illustrative setup, not a named product. Replace the sample dimensions with measured values before relying on the result.

Example setup. Values are illustrative examples, not defaults for a product, manufacturer or local building standard. Replace them with measured dimensions.

Check monitor footprint, arm base, desk depth/thickness, load rating and an exact VESA pattern from the device manuals.

Length entries accept mm, cm, m, inches or feet. Weight fields are in kg. Check the exact product manual for model-dependent requirements.

Fits

Fits. Tightest constraint: desk thickness above clamp minimum. Physical space remaining: 1.5 cm 0 ft 1 in. After your selected target: 1.5 cm 0 ft 1 in.

Fits1.5 cm 0 ft 1 in after targetView details ↑

Check monitor footprint, arm base, desk depth/thickness, load rating and an exact VESA pattern from the device manuals.

  • Compatible: Monitor weight within arm rating. 8 kg monitor versus 12 kg arm rating.
  • Compatible: VESA pattern supported. 100x100 required; checked against the comma-separated arm pattern list.
      DimensionRequiredTargetAvailablePhysical marginTarget margin
      monitor width on desk61.5 cm 2 ft 0 in61.5 cm 2 ft 0 in140.0 cm 4 ft 7 in+78.5 cm 2 ft 7 in+78.5 cm 2 ft 7 in
      monitor and arm base depth on desk40.0 cm 1 ft 4 in40.0 cm 1 ft 4 in70.0 cm 2 ft 4 in+30.0 cm 1 ft 0 in+30.0 cm 1 ft 0 in
      desk thickness above clamp minimum1.0 cm 0 ft 0 in1.0 cm 0 ft 0 in2.5 cm 0 ft 1 in+1.5 cm 0 ft 1 in+1.5 cm 0 ft 1 in
      desk thickness below clamp maximum2.5 cm 0 ft 1 in2.5 cm 0 ft 1 in8.0 cm 0 ft 3 in+5.5 cm 0 ft 2 in+5.5 cm 0 ft 2 in

      Assumptions

      • Use the monitor without its stand for weight and outer dimensions; the entered arm-base depth is added to the monitor depth on the desk.
      • VESA compatibility requires an exact pattern match in the supported-pattern list. Confirm adapters, fasteners and model-specific limits with the manuals.
      • The result does not model arm reach, joint collision, edge clamp shape or wall clearance.

      Scope and limitations

      • No monitor-arm product catalog or adapter compatibility database is included.
      • Arm reach, wall collisions, cable clearance and mounting-surface strength are not modeled.

      Sources and entered data

      • Fitwise internal reference-size and clearance convention — Fitwise.stream

      Calculation methodology · Measurement conventions · About and data sources