Will this fridge fit the opening?

Measure the fridge outside dimensions with handles and accessories included, and measure the opening at its narrowest points.

How this check works

The page checks width, depth and height separately. Rear, top and side clearances are separate targets that you enter from the exact model manual.

The calculator starts with a labeled illustrative setup, not a named product. Replace the sample dimensions with measured values before relying on the result.

Example setup. Values are illustrative examples, not defaults for a product, manufacturer or local building standard. Replace them with measured dimensions.

Compare measured appliance dimensions with a cabinet or alcove and separately enter manual-based installation margins.

Length entries accept mm, cm, m, inches or feet. Weight fields are in kg. Check the exact product manual for model-dependent requirements.

Fits

Fits. Tightest constraint: appliance and side installation space. Physical space remaining: 5.0 cm 0 ft 2 in. After your selected target: 5.0 cm 0 ft 2 in.

Fits5.0 cm 0 ft 2 in after targetView details ↑

Compare measured appliance dimensions with a cabinet or alcove and separately enter manual-based installation margins.

        DimensionRequiredTargetAvailablePhysical marginTarget margin
        appliance and side installation space60.0 cm 2 ft 0 in60.0 cm 2 ft 0 in65.0 cm 2 ft 2 in+5.0 cm 0 ft 2 in+5.0 cm 0 ft 2 in
        appliance and rear/service installation space65.0 cm 2 ft 2 in65.0 cm 2 ft 2 in70.0 cm 2 ft 4 in+5.0 cm 0 ft 2 in+5.0 cm 0 ft 2 in
        appliance and top installation space85.0 cm 2 ft 9 in85.0 cm 2 ft 9 in90.0 cm 2 ft 11 in+5.0 cm 0 ft 2 in+5.0 cm 0 ft 2 in

        Assumptions

        • Opening values are clear usable interior dimensions, not outside cabinet dimensions.
        • Installation clearances are user-entered from the exact model manual. Zero means no extra installation margin was included; Fitwise supplies no default safety or ventilation minimum.
        • This mode does not model hoses, plugs, doors, packaging or delivery route.

        Scope and limitations

        • Door swing, hinge reversals, water line, ventilation and delivery access need separate checks against the appliance manual and route.

        Sources and entered data

        • Fitwise internal reference-size and clearance convention — Fitwise.stream

        Calculation methodology · Measurement conventions · About and data sources