Does the play equipment fit with its manufacturer use zone?

The use-zone check is incomplete until you enter the exact manual/model reference and all sides of the manufacturer zone.

How this check works

Physical equipment footprint and the manual-entered use-zone envelope are separate dimensions; the calculator asks for review when the use zone is unverified.

The calculator starts with a labeled illustrative setup, not a named product. Replace the sample dimensions with measured values before relying on the result.

Example setup. Values are illustrative examples, not defaults for a product, manufacturer or local building standard. Replace them with measured dimensions.

Compare the equipment footprint and manufacturer-specified use zone with a plot. No generic child-safety clearance is supplied.

Equipment outside width

Equipment outside depth

Equipment outside height

Clear overhead height (0 if open sky)

Usable plot width

Usable plot depth

Use-zone source status

Manufacturer use zone left

Manufacturer use zone right

Manufacturer use zone front

Manufacturer use zone rear

Length entries accept mm, cm, m, inches or feet. Weight fields are in kg. Check the exact product manual for model-dependent requirements.

Tight fit

Physical space remains, but selected targets are short on . See physical and target margins below.

Tight fitTarget shortView details ↑

Compare the equipment footprint and manufacturer-specified use zone with a plot. No generic child-safety clearance is supplied.

Manufacturer use-zone dimensions and a manual/model reference are required before treating this as a complete play-space assessment.

Dimensions and compatibility envelopes for the selected Fit Services calculation
Dimension	Required	Target	Available	Physical margin	Target margin
equipment footprint and manufacturer use zone width	250.0 cm 8 ft 2 in	350.0 cm 11 ft 6 in	500.0 cm 16 ft 5 in	+250.0 cm 8 ft 2 in	+150.0 cm 4 ft 11 in
equipment footprint and manufacturer use zone depth	250.0 cm 8 ft 2 in	350.0 cm 11 ft 6 in	500.0 cm 16 ft 5 in	+250.0 cm 8 ft 2 in	+150.0 cm 4 ft 11 in

Assumptions

The equipment use zone is safety-sensitive and must be copied from the exact manufacturer manual; Fitwise supplies no generic use-zone dimensions.
A physical footprint fit does not establish safe fall zones, impact surface, anchors, overhead hazards or supervision requirements.

Scope and limitations

No generic safety/fall zone is supplied.
Surface impact, anchoring, supervision, overhead hazards and legal requirements are not assessed.

Sources and entered data

Fitwise internal reference-size and clearance convention — Fitwise.stream

Calculation methodology · Measurement conventions · About and data sources